Testing Scope
Woven and Non-woven Geotextile Test Scope:
Non-Woven Geo-Textile
| ID | Name of test parameter | Testing method | Unit |
|---|---|---|---|
GP01 | Determination of mass per unit area | BS EN ISO-9864:2005 | gm/m2 |
GP02 | Determination of thickness at 2kpa specified pressures. | BS EN ISO-9863-1:2005 | mm |
GP03 | Wide-width tensile test | BS EN ISO-10319:2015 | kN/m |
GP04 | Static puncture test
(CBR test) | BS EN ISO-12236:2006 | N,kN |
GP05 | Determination of Water Permeability ( Both Vertical & Horizontal ) | BS EN ISO-11058:2010 | m/s, cm/s/ l/m2/s |
GP06 | Tensile test for joints/ seams by wide-width strip method | BS EN ISO-10321:2015 | kN/m |
GP07 | Grab breaking load and Elongation | ASTM D 4632 | N,kN |
GP08 | Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type (UV Weathering resistance test) | ASTM D 4355 | % |
GP09 | Determination of the characteristic opening size (wet sieving) | BS EN ISO-12956:2010 | µm,mm |
GP10 | Determination of Abrasion resistance under wet condition for hydraulic application | ISO/TC 221/SC N (ISO/WD:2016 E)
Or
BAW | % |
GP11 | UV Spectroscopy test | Freitag Method 1983 | nm |
GP12 | Trapezoidal tear strength test | ASTM D4533 | N,kN |
GP13 | Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation | ISO 13438:2018 | % |
GP14 | Determining Apparent Opening Size of a Geotextile | ASTM D4751 | µm,mm |
GP15 | Determination of tensile strength and elongation | BS EN 29073-3-1992 | kN/m |
GP16 | Tensile properties of geotextiles by the wide-width strip | ASTM D4595-09 | kN/m |
GP17 | Standard test method for Breaking Force and Elongation of Textile Fabrics (Strip Method) | (Strip Method)
ASTM D5035-11 | kN/m |
GP18 | Test Method for
Index Puncture Resistance | ASTM D4833-07 | N,kN |
GP19 | Test Method for
Hydraulic Bursting Strength | ASTM D3786-01 | N,kN |
GP20 | Determining the (In-plane) Flow Rate per Unit Width and
Hydraulic Transmissivity (Discharge Capacity) | ASTM D4716-08 | m3/s,m3/year |
GP21 | Determination of single-end breaking
force and elongation at break | ISO 2062-09 | cN,N |
GP22 | Quantitative Chemical Analysis | ISO 1833-24 | % |
Woven Geo-Textile
| ID | Name of test parameter | Testing method | unit |
|---|---|---|---|
WG01 | Determination of mass per unit area | BS EN ISO-9864:2005 | gm/m2 |
WG02 | Determination of thickness at 2kpa specified pressures. | BS EN ISO-9863-1:2005 | mm |
WG03 | Wide-width tensile test | BS EN ISO-10319:2015 | kN/m |
WG04 | Static puncture test (CBR test) | BS EN ISO-12236:2006 | m/s, cm/s, l/m2/s |
WG05 | Determination of water permeability test | BS EN ISO-11058:2010 | kN/m |
WG06 | Tensile test for joints/ seams by wide-width strip method | BS EN ISO-10321:2015 | N,kN |
WG07 | Grab breaking load and Elongation | ASTM D 4632 | % |
WG08 | Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type (UV Weathering resistance test) | ASTM D 4355 | µm,mm |
WG09 | Determination of the characteristic opening size (wet sieving) | BS EN ISO-12956:2010 | % |
WG10 | Determination of Abrasion resistance under wet condition for hydraulic application | ISO/TC 221/SC N (ISO/WD:2016 E) Or BAW | nm |
WG11 | UV Spectroscopy test | Freitag Method 1983 | N,kN |
WG12 | Trapezoidal tear strength test | ASTM D4533 | % |
WG13 | Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation | ISO 13438:2018 | µm,mm |
WG14 | Determining Apparent Opening Size of a Geotextile | ASTM D4751 | kN/m |
WG15 | Tensile properties of geotextiles by the wide-width strip | ASTM D4595-09 | kN/m |
WG16 | Standard test method for Breaking Force and Elongation of Textile Fabrics (Strip Method) | (Strip Method) ASTM D5035-11 | kN/m |
WG17 | Test Method for Index Puncture Resistance | ASTM D4833-07 | N,kN |
WG18 | Test Method for Hydraulic Bursting Strength | ASTM D3786-01 | N,kN |
WG19 | Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity (Discharge Capacity) | ASTM D4716-08 | m3/s,m3/year |
WG20 | Determination of single-end breaking force and elongation at break | ISO 2062-09 | cN,N |
WG21 | Quantitative chemical analysis | ISO 1833-24 | % |
Sewing Thread
| ID | Name of test parameter | Testing method | unit |
|---|---|---|---|
ST01 | Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type (UV Weathering resistance test) | ASTM D 4355 | % |
ST02 | UV Spectroscopy test | Freitag Method 1983 | nm |
ST03 | Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation | ISO 13438:2018 | % |
ST04 | Determination of single-end breaking force and elongation at break | ISO 2062-09 | cN,N |
ST05 | Quantitative chemical analysis | ISO 1833-24 | % |
ST06 | Denier | —– | —– |
Prefabricated Vertical Drain (PVD)
| ID | Name of test parameter | Testing method | unit |
|---|---|---|---|
PV01 | Determination of mass per unit area | BS EN ISO-9864:2005 | gm/m2 |
PV02 | Determination of thickness at 2kpa specified pressures. | BS EN ISO-9863-1:2005 | mm |
PV03 | Wide-width tensile test | BS EN ISO-10319:2015 | kN/m |
PV04 | Static puncture test (CBR test) | BS EN ISO-12236:2006 | N,kN |
PV05 | Determination of water permeability test | BS EN ISO-11058:2010 | m/s, cm/s/ l/m2/s |
PV06 | Grab breaking load and Elongation | ASTM D 4632 | N,kN |
PV07 | Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type (UV Weathering resistance test) | ASTM D 4355 | % |
PV08 | Determination of the characteristic opening size (wet sieving) | BS EN ISO-12956:2010 | µm,mm |
PV09 | UV Spectroscopy test | Freitag Method 1983 | nm |
PV10 | Trapezoidal tear strength test | ASTM D4533 | % |
PV11 | Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation | ISO 13438:2018 | µm,mm |
PV12 | Determining Apparent Opening Size of a Geotextile | ASTM D4751 | kN/m |
PV13 | Tensile properties of geotextiles by the wide-width strip | ASTM D4595-09 | kN/m |
PV14 | Standard test method for Breaking Force and Elongation of | (Strip Method) | kN/m |
PV15 | Standard test method for Breaking Force and Elongation of Textile Fabrics (Strip Method) | (Strip Method) ASTM D5035-11 | N,kN |
PV16 | Test Method for Index Puncture Resistance | ASTM D4833-07 | N,kN |
PV17 | Test Method for Hydraulic Bursting Strength | ASTM D3786-01 | m3/s,m3/year |
PV18 | Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity (Discharge Capacity) | ASTM D4716-08 | cN,N |
PV19 | Quantitative chemical analysis | ISO 1833-24 | % |
PV20 | Unfiled Bag Size (outside dimensions) | —– | mm,cm |
PV21 | Nominal Side Ratio | —– | —– |
PV22 | Width | —– | mm |
PV23 | Mass per linear meter | —– | gm |
PV24 | Structure | —– | —– |
PV25 | Equivalent diameter | —– | mm |
Geogrid
| ID | Name of test parameter | Testing method | unit |
|---|---|---|---|
GG01 | Wide-width tensile test | BS EN ISO-10319:2015 | kN/m |
GG02 | Tensile properties of geotextiles by the wide-width strip | ASTM D4595-09 | kN/m |
